Search Engine Optimization - SEO

6 Dangerous Rel Canonical Problems Based on Crawling 11M+ Pages in 2014

Glenn Gabe
Written by Glenn Gabe

Based on helping clients with Panda work, Penguin problems, SEO technical audits, etc., I end up crawling a lot of websites. In 2014, I estimate that I crawled over eleven million pages while helping clients. And during those crawls, I often pick up serious technical problems inhibiting the SEO performance of the sites in question.

For example, surfacing response code issues, redirects, thin content, duplicate content, metadata problems, mobile issues, and more.  And since those problems often lie below the surface, they can sit unidentified and unresolved for a long time. It’s one of the reasons I believe SEO technical audits are the most powerful deliverable in all of SEO.

Last week, I found an interesting comment from John Mueller in a Google Webmaster Hangout video. He was speaking about the canonical url tag and explained that Google needs to process rel canonicalas a second or third step (at 48:30 in the video). He explained that processing rel canonical signals is not part of the crawling process, but instead, it’s handled down the line. And that’s one reason you can see urls indexed that are canonicalized to other pages. It’s not necessarily a problem, but gives some insight into how Google handles rel canonical.

When analyzing my tweets a few days later, I noticed that specific tweet got a lot of eyeballs and engagement.

Tweet About Rel Canonical and John Mueller of Google

 

That got me thinking that there are probably several other questions about rel canonical that are confusing webmasters. Sure, Google published a post covering some common rel canonical problems, but that doesn’t cover all of the issues webmasters can face. So, based on crawling over eleven million pages in 2014, I figured I would list some dangerous rel canonical issues I’ve come across (along with how to rectify them). My hope is that some readers can leave this post and make changes immediately. Let’s jump in.

 

1. Canonicalizing Many URLs To One
When auditing websites I sometimes come across situations where entire sections of content are being canonicalized to one url. The sections might contain dozens or urls (or more), but the site is using the canonical url tag on every page in the section pointing to one other page on the site.

If the site is canonicalizing many pages to one, then it will have little chance of ranking for any of the contenton the canonicalized pages. All of the indexing properties will be consolidated to the url used in the canonic al url tag (in the href). Rel canonical is meant to handle very similar content at more than one url, and was not meant for handling many pages of unique content pointing to one other page.

When explaining this to clients, they typically didn’t understand the full ramifications of implementing a many to one rel canonical strategy. By the way, the common reason for doing this is to try and boost the rankings of the most important pages on the site. For example, webmasters believe that if they canonicalize 60 pages in a section to the top-level page, then that top-level page will be the all-powerful url ranking in the SERPs. Unfortunately, while they are doing that, they strip away any possibility of the canonicalized pages ranking for the content they hold. And on larger sites, this can turn ugly quickly.

Rel Canonical Many URLs to One
If you have unique pages with valuable content, thendo not canonicalize them to other pages… Let those pages be indexed, optimize the pages for the content at hand, and make sure you can rank for all of the queries that relate to that content. When you take the long tail of SEO into account, those additional pages with unique content can drive many valuable visitors to your site via organic search. Don’t underestimate the power of the long tail.

 

2. Daisy Chaining Rel Canonical
When using the canonical url tag, you want to avoid daisy chaining hrefs. For example, if you were canonicalizing page2.htm to page1.htm, but page 1.htm is then canonicalized to page3.htm, then you are sending very strange signals to the engines. To clarify, I’m not referring to actual redirects (like 301s or 302s), but instead, I’m talking about the hrefs used in the canonical url tag.

Here’s an example:
page 2.htm includes the following: <link rel=“canonical” href=“page1.htm” />
But page1.htm includes this: <link rel=“canonical” href=“page3.htm” />

Daisy Chaining Rel Canonical

While conducting SEO audits, I’ve seen this botched many times, even beyond the daisy chaining. Sometimes page3.htm doesn’t even exist, sometimes it redirects via 301s or 302s, etc.

Overall, don’t send mixed signals to the engines about which url is the canonical one. If you say it’s page1.htm but then tell the engines that it’s page3.htm once they crawl page1.htm, and then botch page3.htm in a variety of ways, you might experience some very strange ranking problems. Be clear and direct via rel canonical.

 

3. Using The Non-Canonical Version
This situation is a little different, but can cause problems nonetheless. I actually just audited a site that used this technique across 2.1M pages. Needless to say, they will be making changes asap. In this scenario, a page is referencing a non-canonical version of the original url via the canonical url tag.  But the non-canonical version actually redirects back to the original url.

For example:
page1.htm includes this: <link rel=“canonical” href=“page1.htm?id=46” />
But page1.htm?id=46 redirects back to page1.htm

Rel Canonical to Non-Canoncial Version of URL

So in a worst-case scenario, this is implemented across the entire site and can impact many urls. Now, Google views rel canonical as a hint and not a directive. So there’s a chance Google will pick up this error and rectify the issue on its end. But I wouldn’t bank on that happening. I would fix rel canonical to point to the actual canonical urls on the site versus non-canonical versions that redirect to the original url (or somewhere else).

 

4. No Rel Canonical + The Use of Querystring Parameters
This one is simple. I often find websites that haven’t implemented the canonical url tag at all. For some smaller and less complex sites, this isn’t a massive problem. But for larger, more complex sites, this can quickly get out of control.

As an example, I recently audited a website that heavily used campaign tracking parameters (both from external campaigns and from internal promotions). By the way, don’t use campaign tracking parameters on internal promotions… they can cause massive tracking problems. Anyway, many of those urls were getting crawled and indexed. And depending on how many campaigns were set up, some urls had many non-canonical versions being crawled and indexed.

Not Using Rel Canonical With Campaign Parameters

By implementing the canonical url tag, you could signal to the engines that all of the variations of urls with querystring parameters should be canonicalized to the original, canonical url. But without rel canonical in place, you run the risk of diluting the strength of the urls in question (as many different versions can be crawled, indexed, and linked to from outside the site).

Imagine 500K urls indexed with 125K duplicate urls also indexed. And for some urls, maybe there are five to ten duplicates per page. You can see how this can get out of control. It’s easy to set up rel canonical programmatically (either via plugins or your own server-side code). Set it up today to avoid a situation like what I listed above.

 

5. Canonical URL Tag Not Present on Mobile Urls (m. or other)
Mobile has been getting a lot of attention recently (yes, understatement of the year). When clients are implementing an m. approach to mobile handling, I make sure to pay particular attention the bidirectional annotations on both the desktop and mobile urls. And to clarify, I’m not just referring to a specific m. setup. It can be any mobile urls that your site is using (redirecting from the desktop urls to mobile urls).

For example, Google recommends you add rel alternate on your desktop urls pointing to your mobile urls and then rel canonical on your mobile urls pointing back to your desktop urls.

Not Using Rel Canonical With Mobile URLs

This ensures Google understands that the pages are the same and should be treated as one. Without the correct annotations in place, you are hoping Google understands the relationship between the desktop and mobile pages. But if it doesn’t, you could be providing many duplicate urls on your site that can be crawled and indexed. And on larger-scale websites (1M+ pages), this can turn ugly.

Also, contrary to what many think, separate mobile urls can work extremely well for websites (versus responsive or adaptive design). I have a number of clients using mobile urls and the sites rank extremely well across engines. You just need to make sure the relationship is sound from a technical standpoint.

 

6. Rel Canonical to a 404 (or Noindexed Page)
The last scenario I’ll cover can be a nasty one. This problem often lies undetected until pages start falling out the index and rankings start to plummet. If a site contains urls that use rel canonical pointing to a 404 or a noindexed page, then the site will have little shot of ranking for the content on those canonicalized pages. You are basically telling the engines that the true, canonical url is a 404 (not found), or a page you don’t want indexed (a page that uses the meta robots tag containing “noindex”).

I had a company reach out to me once during the holidays freaking out because their organic search traffic plummeted. After quickly auditing the site, it was easy to see why. All of their core pages were using rel canonical pointing to versions of that page that returned 404 header response codes. The site (which had over 10M pages indexed) was giving Google the wrong information, and in a big way.

Rel Canonical Pointing to 404 or Noindexed Page
Once the dev team implemented the change, organic search traffic began to surge. As more and more pages sent the correct signals to Google, and Google indexed and ranked the pages correctly, the site regained its traffic. For an authority site like this one, it only took a week or two to regain its rankings and traffic. But without changing the flawed canonical setup, I’m not sure it would ever surge back.

Side Note: This is why I always recommend checking changes in a staging environment prior to pushing them live. Letting your SEO review all changes before they hit the production site is a smart way to avoid potential disaster.

 

Summary – Don’t Botch Rel Canonical
I’ve always said that you need a solid SEO structure in order to rank well across engines. In my opinion, SEO technical audits are worth their weight in gold (and especially for larger-scale websites.) Rel canonical is a great example of an area that can cause serious problems if not handled correctly. And it often lies below the surface, wreaking havoc by sending mixed signals to the engines.

My hope is that the scenarios listed above can help you identify, and then rectify canonical url problems riddling your website. The good news is that the changes are relatively easy to implement once you identify the problems. My advice is to keep rel canonical simple, send clear signals, and be consistent across your website. If you do that, good things can happen. And that’s exactly what you want SEO-wise.

GG

 

Source: http://www.hmtweb.com/marketing-blog/dangerous-rel-canonical-problems/

About the author

Glenn Gabe

Glenn Gabe

Glen Gabe is a digital marketing consultant with a strong focus on SEO, SEM and web analytics. He is a columnist at Search Engine Watch and has posted some of the most in-depth and actionable content related to SEO audits that I’ve read anywhere on the web.